All types standard high pressure hydraulic hose with special specifications

Samway supply standard high pressure hydraulic hose including high-pressure hose 1SN, 2SN,  4SP, 4SH, R13 and R15.

They are used as flexible hoses in the hydraulic systems of machines and mechanisms for the transportation of mineral and hydraulic oil, fuel oil and water-oil emulsions. High pressure hydraulic hoses are also used in logging, road-construction, agricultural, mining and oil and gas industries.

The high pressure hose 1SN

Tube: oil resistant synthetic rubber
Reinforcement: one high tensile steel wire braid
Cover: synthetic rubber, abrasion resistant
Temperature range: -40°C to +100°C (+120°C max)

Inner diameter			Outside diameter	Operating pressure	Burst pressure	Bending radius	weight
DN	mm	inch	mm	bar	bar	mm	Kg/m
5	4.8	3/16	11.8	250	1000	90	0.196
6	6.4	1/4	13.4	225	900	100	0.226
8	8	5/16	15	215	850	115	0.265
10	9.5	3/8	17.4	180	720	130	0.335
12	12.7	1/2	20.6	160	640	180	0.415
16	16	5/8	23.7	130	520	200	0.496
19	19	3/4	27.7	105	420	240	0.638
25	25.4	1	35.6	88	350	300	0.980
32	31.8	1-1/4	43.5	63	250	420	1.207
38	38.1	1-1/2	50.6	50	200	500	1.560
51	50.8	2	64	40	160	630	2.108

High pressure hydraulic hose 1SN	High pressure hydraulic hose 2SN

The high pressure hose 2SN

Tube: oil resistant synthetic rubber
Reinforcement: two high tensile steel wire braids
Cover: synthetic rubber, abrasion resistant
Temperature range: -40°C to +100°C (+120°C max)

Nominal specifications:

Inner diameter			Outside diameter	Operating pressure	Burst pressure	Bending radius	weight
DN	mm	inch	mm	bar	bar	mm	Kg/m
5	4.8	3/16	12.7	250	1000	90	0.210
6	6.4	1/4	15.9	225	900	100	0.300
8	7.9	5/16	17.5	215	850	115	0.350
10	9.5	3/8	19.8	180	720	130	0.430
12	12.7	1/2	23.0	160	640	180	0.540
16	15.9	5/8	26.2	130	520	200	0.640
19	19	3/4	20.2	105	420	240	0.800
25	25.4	1	38.1	88	350	300	1.170
32	31.8	1-1/4	46.0	63	250	420	1.450
38	38.1	1-1/2	52.4	50	200	500	1.770
51	50.8	2	66.7	40	160	630	2.505

The high pressure hydraulic hose 4SP and 4SH have the same inner construction

Tube: oil resistant synthetic rubber
Reinforcement: four helices high tensile steel wire
Cover: Synthetic rubber, abrasion resistant 
Operating temperature: -40 ° C to +100 ° C (+125 ° C max)

4SP Nominal specifications

Inner diameter			Outside diameter	Operating pressure	Burst pressure	Bending radius	weight
DN	mm	inch	mm	bar	bar	mm	Kg/m
6	6.4	1/4	17.8	450	1800	150	0.615
10	9.5	3/8	21.4	445	1780	180	0.850
12	12.7	1/2	24.6	415	1660	230	0.935
16	15.9	5/8	28.5	350	1440	250	1.146
19	19	3/4	32.1	350	1440	300	1.554
25	25.4	1	39.7	280	1120	340	2.033
32	31.8	1-1/4	50.8	210	840	460	3.176
38	38.1	1-1/2	57.1	185	740	560	3.657
51	50.8	2	70.6	165	660	660	5.137

High pressure hose with four layers of high tensile steel wire	High pressure hoses with six windings

The high temperature hydraulic hose 4SH

This product can be used for hydraulic systems of ultrahigh pulsating pressure with high temperature working fluids for oil-based

Inner diameter			Outside diameter	Operating pressure	Burst pressure	Bending radius	weight
DN	mm	inch	mm	bar	bar	mm	Kg/m
19	19	3/4	32.2	450	1680	280	1.556
25	25.4	1	38.7	380	1520	340	2.087
32	31.8	1-1/4	45.5	325	1300	460	2.571
38	38.1	1-1/2	53.5	290	1160	560	3.439
51	50.8	2	68.1	250	1000	700	4.903

The high pressure hose R13 and R15 have the same inner construction

Tube: oil resistant synthetic rubber
Reinforcement: six layers of high tensile steel wire spirals 
Outer layer: synthetic rubber resistant to abrasion 
Temperature range: from -40 º C to +120 º C (+125 º C Max) 
Application: Hydraulic systems ultrahigh pulsating pressure with high temperature working fluids for oil-based

Specifications of high pressure hydraulic hose R13

Inner diameter			Outside diameter	Operating pressure	Burst pressure	Bending radius	weight
DN	mm	inch	mm	bar	bar	mm	Kg/m
6	6.4	1/4	16.7	776	3100	120	0.930
10	9.5	3/8	19.8	690	2760	150	1.100
12	12.7	1/2	23.1	512	2070	200	1.350
19	19.0	3/4	32.0	345	1380	240	1.65.
25	25.4	1	38.7	345	1380	300	2.250
32	31.8	1-1/4	49.8	345	1380	420	3.310
38	38.1	1-1/2	57.3	345	1380	500	4.950
51	50.8	2	71.1	345	1380	630	7.000

Specifications of R15

Inner diameter			Outside diameter	Operating pressure	Burst pressure	Bending radius	weight
DN	mm	inch	mm	bar	bar	mm	Kg/m
10	9.5	3/8	23.3	345	1655	150	0.770
12	12.7	1/2	26.8	345	1655	200	0.950
19	19	3/4	32.6	345	1920	240	1.650
25	25.4	1	39.2	345	1660	300	2.250
32	31.8	1-1/4	50.4	345	1520	420	3.895
38	38.1	1-1/2	57.9	345	1600	500	4.956
51	50.8	2	71.9	345	1500	630	7.087

High pressure hydraulic hoses available in various sizes	Standard high pressure hydraulic hose used for mineral and hydraulic oil
High pressure hydraulic hoses in black	Several types of hydraulic hoses

 Samway provide all types of hydraulic hose, industrial hose, as well as rubber hose, plastic hose, water hose , so please feel free to contact us if you have any request.

 

---

 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C.
Type A consists of an inner tube of oil-resistant synthetic rubber, a single wire braid reinforcement, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube or over the wire reinforcement (or both) to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, except AT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, steel-wire reinforcement according to hose type, as detailed below, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type A has two braids of wire reinforcement
Type B  has two spiral plies and one braid of reinforcement
Type AT is the same as Type A, but AT  has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.
Type BT is the same as Type B, but BT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R3 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber, two braids of suitable textile yarn, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R4 hose should be used in low pressure and vacuum applications, with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber, a reinforcement consisting of a ply, or plies, of woven or braided textile fibers with a suitable spiral of body wire, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R5 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber reinforced with two textile braids separated by a high-tensile-strength steel-wire braid. All of the braids are impregnated with an oil- and mildew-resistant synthetic rubber compound.

 

 

 

SAE 100R6 hose (above) should be used with petroleum- and water-based hydraulic fluids within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, one braided ply of suitable textile yarn, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R7 thermoplastic hose (above) should be used for synthetic, petroleum-, and water-based hydraulic fluids in a temperature range from140° to 93° C. It consists of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic-fiber reinforcement and a hydraulic fluid- and weather-resistant thermoplastic cover. Nonconductive 100R7 is identified with an orange cover and appropriate lay line. Its pressure capacity is similar to that of 100R1.

 

 

 

SAE 100R8 hose is high-pressure thermoplastic hose that should be used with synthetic, petroleum- and water-based hydraulic fluids within a temperature range from140° to 93° C. It consists of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic-fiber reinforcement and a hydraulic fluid- and weather-resistant thermoplastic cover. Nonconductive 100R8 is identified with an orange cover and appropriate lay line. Its pressure capacity is similar to that of 100R2.

 

 

 

SAE 100R9 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from 140° to 100° C.

Type A consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, but AT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R10 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from140° to 100° C.

Type A consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, but AT's cover is designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R11 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from 140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, six spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R12 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from 140° to 121° C. It consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R13 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from 140° to 121° C.  It is constructed with an inner tube of oil-resistant synthetic rubber, followed by multiple spiral plies of heavy wire wrapped in alternating directions, and concluding with an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R14 hose should be used with petroleum-, synthetic-, and water-based hydraulic fluids within a temperature range from 154° to 204° C.
Type A consists of an inner tube of polytetrafluorethylene (PTFE) reinforced with a single braid of type 303XX stainless steel.
Type B has the same construction as Type A, but B  has the additional feature of an electrically-conductive inner surface to prevent buildup of an electrostatic charge.

 

 

 

SAE 100R15 hose should be used with petroleum-based hydraulic fluids within a temperature range from 140° to 121° C. It consists of an inner tube of oil-resistant synthetic rubber, multiple spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant rubber cover. A ply, or braid, of suitable material may be used over or within the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R16  hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, steel wire reinforcement of one or two braids, and an oil-and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

SAE 100R2

 

SAE 100R1 

---

 

SAE 100R1 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C.
Type A consists of an inner tube of oil-resistant synthetic rubber, a single wire braid reinforcement, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube or over the wire reinforcement (or both) to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, except AT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

SAE 100R2 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, steel-wire reinforcement according to hose type, as detailed below, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type A has two braids of wire reinforcement
Type B  has two spiral plies and one braid of reinforcement
Type AT is the same as Type A, but AT  has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.
Type BT is the same as Type B, but BT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R3 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber, two braids of suitable textile yarn, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R4 hose should be used in low pressure and vacuum applications, with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber, a reinforcement consisting of a ply, or plies, of woven or braided textile fibers with a suitable spiral of body wire, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R5 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber reinforced with two textile braids separated by a high-tensile-strength steel-wire braid. All of the braids are impregnated with an oil- and mildew-resistant synthetic rubber compound.

 

 

 

SAE 100R6 hose (above) should be used with petroleum- and water-based hydraulic fluids within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, one braided ply of suitable textile yarn, and an oil- and weather-resistant synthetic rubber cover.

 

 

 

SAE 100R7 thermoplastic hose (above) should be used for synthetic, petroleum-, and water-based hydraulic fluids in a temperature range from140° to 93° C. It consists of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic-fiber reinforcement and a hydraulic fluid- and weather-resistant thermoplastic cover. Nonconductive 100R7 is identified with an orange cover and appropriate lay line. Its pressure capacity is similar to that of 100R1.

 

 

 

SAE 100R8 hose is high-pressure thermoplastic hose that should be used with synthetic, petroleum- and water-based hydraulic fluids within a temperature range from140° to 93° C. It consists of a thermoplastic inner tube resistant to hydraulic fluids with suitable synthetic-fiber reinforcement and a hydraulic fluid- and weather-resistant thermoplastic cover. Nonconductive 100R8 is identified with an orange cover and appropriate lay line. Its pressure capacity is similar to that of 100R2.

 

 

 

SAE 100R9 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from 140° to 100° C.

Type A consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, but AT has a cover designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R10 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from140° to 100° C.

Type A consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.
Type AT has the same construction as Type A, but AT's cover is designed to assemble with fittings that do not require removal of the cover or any portion of it.

 

 

 

SAE 100R11 hose should be used with petroleum- and water-based hydraulic fluids within a temperature range from 140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, six spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R12 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from 140° to 121° C. It consists of an inner tube of oil-resistant synthetic rubber, four spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R13 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from 140° to 121° C.  It is constructed with an inner tube of oil-resistant synthetic rubber, followed by multiple spiral plies of heavy wire wrapped in alternating directions, and concluding with an oil- and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R14 hose should be used with petroleum-, synthetic-, and water-based hydraulic fluids within a temperature range from 154° to 204° C.
Type A consists of an inner tube of polytetrafluorethylene (PTFE) reinforced with a single braid of type 303XX stainless steel.
Type B has the same construction as Type A, but B  has the additional feature of an electrically-conductive inner surface to prevent buildup of an electrostatic charge.

 

 

 

SAE 100R15 hose should be used with petroleum-based hydraulic fluids within a temperature range from 140° to 121° C. It consists of an inner tube of oil-resistant synthetic rubber, multiple spiral plies of heavy wire wrapped in alternating directions, and an oil- and weather-resistant rubber cover. A ply, or braid, of suitable material may be used over or within the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.

 

 

 

SAE 100R16  hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from140° to 100° C. It consists of an inner tube of oil-resistant synthetic rubber, steel wire reinforcement of one or two braids, and an oil-and weather-resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to anchor the synthetic rubber to the wire.